Star Thermal Ticket Printer Installation (Windows)

To install a Star TSP100 TSP143U printer on a Windows machine, follow these instructions

  1. Download the most up to date driver here
  2. Select the SP100 futurePRNT Software
  3. Follow the instructions for installing the software.
  • The printer information should pre-populate. Click the recommended software to download. 
  • Click futurePRNT V7.2 Full, not Lite.
  • After it downloads, you will need to install the program. First extract the file. Once extracted, click Autorun then run.
  • Click Installation, then I Accept. Your computer may prompt you to download daylight. If so, click yes.

    • For Windows machines, make sure you know if you have a 32 bit or 64 bit machine)
      • After installing, make sure the settings are correct
      • Go to 'Devices and Printers'
      • Right Click the Star printer and choose printer properties
      • Click the Advanced tab, click printing defaults on the bottom left
      • Click 'Advanced'
      • For the paper size, choose "72mm x 200mm"
      • Click OK to save changes
    • To edit the cut settings:
      • Click the Device Settings tab
      • Click Page Cut Type and choose Partial Cut in the drop down menu
      • This will allow the printer to cut between each ticket if multiple tickets are sold in one order. 

Star Ticket Printing Installation

Star Ticket Printing Installation

Star Ticket Printing Installation

Star Ticket Printing Installation

Star Ticket Printing Installation

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request